SCADA / HMI software

indusoft

InduSoft Web Studio is a truly unique development and runtime software that incorporates all the tools users need to create SCADA HMI applications, dashboards and OEE interfaces. This highly flexible package allows users to develop applications once, and then deploy them on any supported Microsoft operating system, including Windows CE, Windows Embedded, Windows 7 and Windows Server editions

 

Click here for more information »

Inverter

santerno

1-Sinus Penta

5-function, all purpose inverter, up to 3000 kW

  • Wide power supply voltage range, 200Vac÷690Vac
  • DC power supply range 280÷970Vdc
  • Input frequency 50 - 60Hz
  • Power range 1,3 - 3000kW
  • Enclosure IP00, IP20, IP54
  • Available in stand-alone and cabinet solutions
  • Full compatibility with teleservice software, “REMOTE DRIVE” on internet
  • Compatible with Easy Harmonics, tool for the calculation of
  • Harmonic currents

Click here for more information »

 

 

2-Sinus Penta Box

Inverter in box IP54

  • Wide power supply voltage range, 200Vac - 500Vac.
  • Input frequency 50 - 60Hz
  • Power range 1,3 - 90kW
  • Full compatibility with teleservice software “REMOTE DRIVE” on internet

 Click here for more information »

 

  

3-Sinus Penta Cabinet

Inverter in cabinet

  • Power range 12,5 - 3000 kW
  • Input frequency 50 - 60Hz
  • Wide power supply voltage range, 200Vac - 690Vac.
  • Full compatibility with teleservice software “REMOTE DRIVE” on internet

 Click here for more information »

 

4-Sinus Penta IP54

  • The Sinus series offers, moreover, a range with IP54 protection degree suitable for environmental conditions with strong presence of dusts and water (up to Sinus 0162).
  • Thanks to its robust metallic structure suitable for external installation, it is not necessary to insert this model into any electric cabinet.
  • Main supply, Motor supply and Control board connection are reachable from below by means of the insertion of suitable cable-bushings.
  • It is also possible to add a complete operation board on the front door for the emergency command and the selection of the following 3 functions by key lock selector:
  • LOCAL (LOC) It is possible to operate and adjust Motor speed by the inverter’s keypad (Start, Stop and Speed adjustment).
  • 0 (ZERO) In this position, the inverter is unable to work.
  • REMOTE (REM) It allows to manage the inverter according to its programming by terminal board, serial port or fi eldbus.

Click here for more information »

 

 

5-Sinus N

Sensorless vector control or V/F inverter

  • 200 - 230Vac single phase power supply
  • Power range 0,4 - 3kW
  • Full compatibility with teleservice software “REMOTE DRIVE” on internet

Click here for more information »

 

6-Sinus M

Sensorless vector control or V/F inverter

  • 200 - 480 Vac power supply
  • Power range 0,37 - 22 kW
  • Full compatibility with easy armonich, tool for the calculation of armonich currents
  • Full compatibility with teleservice software “REMOTE DRIVE” on internet

Click here for more information »

 

7-Sinus K Lift

Vector modulation Lift Software for lift applications

  • Wide power supply voltage range, 200Vac - 500Vac
  • Input frequency 50 - 60Hz
  • Power range 1,8 - 75 kW
  • Full compatibility with teleservice software “REMOTE DRIVE” on internet

Click here for more information »

 
 
 
 
 

AC/DC Converter

DCREG2-DCREG4

AC/DC digital converters, two quadrant DCREG2, four quadrant DCREG4

  • Power range 10A - 4500A (2,4kW - 3200kW)
  • Wide power supply voltage range, 200Vac - 690Vac (1000 Vac)
  • Input frequency 50 - 60Hz
  • Full digital
  • Full compatibility with teleservice software “REMOTE DRIVE” on internet

  Click here for more information »

 
 
 
 
 

CU400 for Electromagnets

The Thyristor converters DCREG series now offers the possibility to manage highly inductive loads such as electromagnets.

The load’s typology, assimilable to an ohmic resistor placed in series to a very high inductance, creates some applicative problems which have been efficaciously solved inside the DCREG by means of a control algorithm especially developed for this aim. The fact that the load has a high inductance level causes some functional safety problems which show themselves when, for failures or critical installation, an interruption on one of the main supply meshes is possible. Such interruption, along with the high inductive level of the magnet, can provoke strong sudden overvoltage’s which may even reach some thousands of Volts. It is not anyway possible to protect the converter against such overvoltage’s, except if you take specifi c measures while installing it. The most effi cacious method consists in providing a closing mesh on the magnet’s current, thanks to a special system called CU400.

The energy accumulated into the magnet is “absorbed” and stocked into a clamping circuit of RC type, in which the function of overcurrent limiting is ensured by the inner capacitor, while the subsequent dissipation of such energy is ensured by the inner resistor. If a power supply conducting mesh is physically interrupted (because of wiping contacts or other) or the connecting cables between magnet and converter open, the voltage arc generated by the current interruption is limited by the clamping circuit able to limit overvoltage, taking it to safe values. For this reason, the above configuration is necessary in case of electromagnets installed on bridge cranes on which the 3phase power supply comes the main supply by means of wiping brushes which might occasionally open.

Click here for more information » 

 

 

AMS90/1

Half-controlled AC/DC single-phase drive

Half-controlled AC/DC single-phase drive used to supply armature and field circuits of D.C. motors, with analog circuit for speed or torque control.

Click here for more information »

 

 

 

 

 

Soft Starter

ASAC0 / ASAC1 Soft starter

Soft start/stop static starters for three-phase asynchronous motors

  • Range 7,5kW - 110kW
  • Power supply voltage range 200 - 575Vac
  • Internal By-pass Contactor
  • Input frequency 50 - 60Hz
  • Full compatibility with teleservice software “REMOTEDRIVE” on internet

Click here for more information »

 

 


ASoft starterSAB 

Soft start/stop static starters for three-phase asynchronous motors

The ASAB is an advanced digital soft start solution for motors from 7 kW to 800 kW. ASAB soft starters provide a complete range of motor and system protection features and have been designed for reliable performance in the most demanding installation situations

Click here for more information »

 

 

ASAMV Soft starter

Soft start/stop static starters medium voltage

  • Range 200A a 600A
  • Power supply voltage range, 2300Vac - 15000Vac
  • Input frequency 50 - 60Hz
  • Full compatibility with teleservice software “REMOTE DRIVE” on internet

Click here for more information » 

 

 

 

May 2017  newsletter "Breathing Air Com

iso 9001 certification

   All © copyrights Rserved to Sigma Industry 2011   sigma star face book sigma star You Tube sigma star linkedin